Agromehanika AGT 850 Back in Working Order with Farm and Fleet Services
Executive Summary
When a customer contacted Farm and Fleet Services about an Agromehanika AGT 850 that would not start after sitting unused for a while, our team carried out on-farm fault-finding to identify the issue. We found that the glow plug fuse had blown due to faulty glow plugs. After ordering the required parts, we returned to the farm, fitted new glow plugs and a new fuse, and got the machine starting properly again. While on site, we also completed a full service at the customer’s request.
Challenge
The customer reported that their Agromehanika AGT 850 would not start and had been standing for some time. A machine left unused can develop faults that are not always obvious, so the priority was to inspect it properly, diagnose the problem, and get it back into reliable working order.
Solution
Our team attended the farm and checked the machine over to find the cause of the starting issue. During inspection, we found that:
- The fuse for the glow plugs had blown
- The root cause was faulty glow plugs
- Replacement parts were needed before the machine could be put back into service
We then:
- Ordered the new glow plugs
- Returned to the farm once the parts arrived
- Fitted the new glow plugs and replacement fuse
- Confirmed that the machine was starting correctly again
- Carried out a service while on site at the customer’s request
This practical on-farm approach meant the customer had the problem diagnosed and resolved without unnecessary delay.
Results
The work completed helped return the AGT 850 to proper working condition, including:
- Starting fault diagnosed on site
- New glow plugs fitted
- Blown fuse replaced
- Machine starting fine again
- Full service completed
Customer Quote
“Farm and Fleet Services quickly found the fault, got the parts sorted, and had the machine starting properly again. Having the service done at the same time was a real help.”
This job is a good example of the reliable support Farm and Fleet Services provides when a machine develops a fault after being left unused. By identifying the cause of the non-start issue, sourcing the right parts, and completing the repair and service on farm, the team got this Agromehanika AGT 850 back into working order with minimal fuss.
If you have a machine that will not start or needs attention after standing idle, Farm and Fleet Services can help with practical fault-finding, on-farm repairs, and servicing you can rely on.
